Maybe you are used to hiring tree trimming companies to handle your trimming needs. Although it’s not bad to do so, you may actually do some of the pruning yourself but only if you understand what is trimming and the different techniques used in trimming.
First, the definition.
Trimming is the process of removing unwanted parts of a tree. Depending on the size of the trimmed branch, different trimming tools are used. Some manual and others powered machines.
But before you dislocate that branch from the tree, there are some factors that you should consider. These factors define the reason why you want to trim the tree.
3 major reason you should trim a tree are:
Tree trimming should be done to enhance its aesthetic appearance. Not only to the tree but also to the surrounding areas. Trimming helps you decide which shape the tree will be in, maybe you need it to blend with other shaped trees or flowers, this will also make it possible to reduce its height and thickness.
On a tree, infections may start from one branch and start spreading to the other parts of the tree. To prevent the whole tree from being infected, you cut-off the infected branch by trimming.
-Increase the health.
Trees’ health is very important. Poor health can be caused by overcrowded branches which prevent adequate circulation of air to the tree. Through trimming the health is enhanced because excess branched are removed providing enough circulation of air.
Crowded branches also tend to form breeding places for tree diseases.
Trees may grow so tall and spread their branches over houses and other structures. This is dangerous especially when the branches, due to uncontrolled circumstances, fall off the trees. Trimming will eliminate this threat living your house safe.
Additionally, tree branches’ that hinder your vision when driving or doing some other activities that need clear eyesight, should be trimmed.
NOTE that tree trimming along power lines should ONLY be handled by those responsible with the power lines.
After identifying with any of the above reasons, it’s time now to get down to work. But how do you trim a tree? When trimming dead or living branches, follow these 2 tree trimming techniques;
-When the branch being pruned is very long, accomplish the trimming process with three cuts. i.e the first cut should be able to make a notch on the side of the branch’s facing away from the retained branch.
The second cut goes to the crotchet of the branch. While the third and last cuts through the stem to remove the stub.
The above tree trimming reasons and techniques will help you do the trimming yourself. If you are not sure of what or where to start the trimming, or if the environments are very dangerous, e.g. the branch to be trimmed is too high on the tree, its advice able to engage the service of a tree trimming company. This company will have the equipment and trained personnel who can handle any kind of trimming no matter the odds involved.
This is a family controlled company from back in 1970’s, in 2000 it was purchased by Troy Brown, the son of Richard brown, the founder. Although Brown is still involved with the daily running of the business Troy and his brother Travis are the one who are at the helm of the company driving it towards customer satisfaction and unique services.
In their portfolio you will find disaster relief projects that among the may projects they have done. The most notable project in their portfolio is during the Hurricane Katrina in New Orleans, Hurricane Charlie in Kissimee, FL, Hurricane Sandy in New York and Hurricane Isaac in Texas.
In Wichita, Kansas City, Springfield and Carolina, they have assisted with relief when hit by ice storms. When a tornado hit Joplin, Brown’s Tree Service was there to offer relief.
For the services offered, brown has three four major categories of services:
1.Firewood and forestry recycling.
Brown says ”Let our tree care experts remove your forestry waste. We'll haul it away and give it a second life through our recycling program”
This statement is very true because they haul away forestry and chop it up into firewood which they sell to factories and individual at affordable prices.
When selling the firewood they pack group the into cords which can be purchased as half cord or full cord. Each of which have different prices and its from hardwood trees like the only..
The prices are cheaper when you haul it by yourself. When they haul for you, you foot the extra charges. If they stack it for your after delivering, they will charge you a small fee.
2.Disease and insect control.
Brown’s Tree Service comes at your rescue when pest and disease invade your trees. Additionally they help put diseases and pests/insects at bay with their preventive maintenance services. This maintains the plants’ health giving your landscape healthy.
Brown’s will also provide you with tree removal services to help you restore the beauty of your yard and at the same time help you reduce the dangerous effects that trees may pose in your property or when they are near structures or when they are hindering your full visibility in the area.
This service includes stump removal to help you reclaim the beauty of your yard. The machinery and expertise they apply here, is top of the class to make sure the services offered are satisfactory and professionally done.
4. Tree pruning.
With Brown’s Tree Service maintaining your lawn, you will be happy to have guests and neighbors looking admiring your lour lawn.
Brown’s know that tree pruning does not only improve the aesthetic of the tree but also keeps it healthy by enhancing air with oxygen. A tree with a good amount of branches is resistant to strong winds.
Pruning does not have to be carried out too often as this will negatively affect the tree. With professional like the Brown’s Tree Services, they know when pruning will have maximum benefits to both you and the tree itself.
While we certainly hope you consider us for your tree service needs, here's what you can expect from any tree of the top tree service providers.
Many services offer vegetation management services for municipalities, cooperatives, and public utilities. As they strive to provide the best services to utility organizations, they do not compromise on the competitive nature of their pricing, quality, and safety which have greatly contributed to them being the first choices for their clients.
In addition to the above services top tree companies offer aerial trimming, emergency storm response, substation maintenance, the right of way maintenance, tree pruning for both rural and urban, herbicide application, line clearing, among others.
Employees are much valued and they are the ones who steer the company forward through special training and professional handling of clients and tasks.
Technology is not a burden but a tool that helps them achieve and exceed their clients' expectations. They do not achieve this without putting the technology capabilities and know-how onto the hands of those who use it most. Their employees.
They have equipped team leaders with smart devices which include smartphones and applications to help in increasing their productivity.
Additionally, they use technology to collaborate with foresters where the forester marks the trees to be trimmed on a digital map and experts receive this information on their tablets and they follow the forester trimming only what was specified on the digital map using pins.
According to services and extent at which the top tree services have adopted technological advancement, they are best to handle any kind of task you throw at them.
This is made possible by a complete fleet of the latest machinery and specialized equipment’s to enable them to handle even the toughest of the task.
Most people consider the tree services near them to be cheaper than engaging the services of a tree company which is miles away. While this is true, there are some other factors I came to realize are used by those offering tree services to draw up a budget for every tree service projects.
Below are the factors:
-Health status of the tree being trimmed.
An infected tree poses more risks to the trimmer and the property around. Many tree trimmers will first ask or assess the health status of the tree before they can give you a quote.
If the tree is healthy, the quote will capture this and would be low but when the tree is largely infected, the charges will be a bit higher to cover the risks of the trimmer falling off or the branches unexpectedly coming down on the property. This is caused by the weak status of the tree and branches to hold together tightly.
When the trees to be trimmed is near risky lines for example, they are close to power and utility lines, tree trimming service will cost higher. The higher charges cater for the risky nature of climbing and trimming the trees since they can damage the utility lines which will have to be repaired later.
If it is difficult to access the tree, the trimming cost rises because sometimes getting to the tree involves special equipment.
A tree trimming service near me will take the height of the tree in consideration when giving me the final quote. Some may even charge according to per foot of tree height. This means that shorter trees will cost less to trim and vice versa. The charges will be higher if the tree is tall and is close to the physical property, power lines etc.
-The shape of the tree.
Is it straight or curved? Not all trees grow straight. Some due to uncontrollable factors grow while it’s curved or bending. When trimming this trees, the chances of accidentally falling off are higher compared to trimming a straight tree. To cater for this risk, a tree trimming service will cost more.
Different tree species have different hardness levels. A tree trimming service considers the species of the tree before giving you a comprehensive quote.
You can expect higher charges when the tree is a hardwood tree like the oak. This is one of the hardest trees and trimming it may sometimes need specialized equipment.
After realizing all these factor matter before I can get a quote from a tree trimming service near me, I usually provide full details of the trees including estimates of the above. This makes the work of the trimmers easier when they are quoting their price.
Tree trimming can be simplified if you have the right equipment and tools to do the trimming. Some of these tools are very simple to use. You can have a collection of these tools so that you can perform some light tree pruning activities around your home or place of business.
Here, we will only discuss simple tools that you can personally use. Apart from trees, these tools can be used to trim a variety of plants e.g flowers.
These are used to trim light branches and also referred to as trimming/pruning shears.
When choosing the right ones for your particular use, they come in different sizes. Each size feels best on different persons’ hands so make sure you choose the size that you feel comfortable with.
They come with safety catch. How easier you can reach the catch and how comfortably you can use it will add to the overall effectiveness when using the tool.
Secateurs are available for both right-handed and left-handed people. For right-handed people, the safety catch is at the top while for the left-handed people, the safety catch is located at the side. This tool comes in different sizes, some fixed and others have an option to vary the length. Variable length secateurs help tree trimmers to adjust to the hand size making them ideal to be used by those with small and large palms.
There are two types of blades used in a secateurs.
Anvil: These are suitable when cutting branches of hardwood trees because the blades don’t overlap when you close the secateurs.
Bypass: These are used to cut soft or young branches because the chances of causing unnecessary damage to the stems are minimal. Its blades bypass/overlap each other to initiate the cut.
2. Pruning loppers.
These have long handles which can reach 2ft and they enable tree trimmers to trim branches that are in a branch-thick place. It is also strong enough to cut branches that have a thickness of up to 1 inch.
All the two tools we have mentioned have their limits when it comes to the thickness of the branches being trimmed.
When the branches are too thick to be trimmed using a secateurs or a lopper, the handsaw is used. With this tool, tree trimmers are able to trim even the thickest of the branches. But they also have their limitations.
When the trimming involves too many of these branches, it becomes tedious using a handsaw. At this point, consider hiring professional tree trimmers because they will use the chainsaw which is faster but requires special handling and operating procedures have to be followed to prevent injury to you or the trees being trimmed.
The above 3 tools must be found in the toolbox of tree trimmers. For your personal use, you can have them and be using them for light pruning actives around your compound.
If the tasks seem risky, seek the services of qualified tree trimmers to reduce the chances of damaging property and injuring yourself.
Sometimes it’s even surprising to have that tittle “tree service technician”. But fortunately, they have that title. This technician deals with everything that concerns trees. From pruning, felling, uprooting e.t.c.
So if you are into a career in this field be ready and comfortable using heavy machinery from driving heavy trucks to operating machinery like a chain saw and others used for pruning and other attention given to trees. Additionally, don’t be afraid of heights as being a tree technician requires that you climb trees some of which are very tall.
But where are these technicians likely to be found?
>Government institutions. Mostly those that deal with trees eg the forestry department.
>Lawn care companies.
Tree service technicians are vastly knowledgeable about the process of cutting and felling trees in that they have to think about the whole process from beginning to end before making any move on the tree. These calculations involve assessing the wind direction at that particular moment, the side to start cutting, where to tie the tree. All these have to be considered to avoid damages to property, livestock, and the technician
Extra services of a tree service technician.
Apart from directly coming into contact with the trees, these technicians can do other thing but still tied to their tree specialty.
Among the other services that can be offered are:
These are a person with the first-hand experience with trees. Therefore with seminars concerning trees, be it in schools, or within other settings, they are called upon to offer speeches on key points concerning trees.
Trees are also valued. And the best person to offer an informed valuation report is one who deals with the trees. A tree service technician.
They are called upon to accurately estimate the value of trees in an event the tree owner wants to sell the trees or the land in which they are located. Since the value of the land, and will be calculated taking into consideration the structures and plants (trees) on the property.
>Formulating a tree maintenance program/budgets.
Trees, especially in the forest setting or around the home, have to be maintained, for them to be in good shape and health although. Services from a tree technician will be greatly needed during these budgeting functions.
>Assessing the health status of trees.
A tree technician will assess trees for any signs of pest or diseases. Earlier recognition of these two will lead to the proper and timely treatment.
Trees are an integral part of humankind and should, therefore, be taken care of. Being informed on how best to handle them will be beneficial.
Maybe you have always been in love with nature especially trees, being a tree service technician is the best bet to stamp your love.
Just like any other company, companies offering tree services are spread across every town and locality. When seeking their services, settling for the right company can be a hard task.
But not anymore. Below is a comprehensive list of factors that should point you towards the right company.
With every company, a past relationship history is very crucial. You should seek to establish past client engagements by the company in question.
As part of their reputation consider their payment options. As a rule of thumb, don’t pay a company before it delivers the services you require.
This will enable you to only pay for work actually done and an option to choose a different company if the work done is not satisfactory.
Although not generally the case, a company with years of service can be presumed to have a good reputation.
Another pointer to a good reputation is the number of professional employees the company has on its payroll.
The company should also provide proof of equipment’s they use. This will include cranes, chainsaws, safety equipment’s etc.
Their website will be a good place to assess their reputation. If it looks good with all the information provided, then, probably, they mean every word they say.
Don’t feel afraid to mingle with your neighbors and ask about the company in question. They may confirm or eliminate your fears.
>Where the company is located
In all quotes you receive from a tree company, is the traveling time and cost included? Choosing a company that is close to you will reduce the traveling cost and time which will positively reflect on the quote received from the company.
There are various modes of payment. For example using a credit card, cash, PayPal, etc. a professional company will give you choices to choose from. When a company only accepts cash payments, be cautious doing business with them as this may be because the company is not registered and paying through any other means will expose them.
Their pricing should also be considerable. Not so high and not so low. A company with worrying low rates may probably not do all the work. E.g it may cut a tree but the disposal or other works on the tree may not be included in the price.
The tree industry has standards that have to be followed. A reliable company will be well aware of these standards. Some of the contents of standards are safety and general work procedures. These are very important in the tree care industry as not complying with this standards may lead to the destruction of property and injury of persons.
>Insurance, License and Certifications.
This should probably be the first thing you should consider. An insured tree company will be able to pay you in case your property is damaged in the course of a service offering by the company. Certifications and appropriate licenses should not be ignored.
By following the above points faithfully, the task of choosing a tree company should not be a pain at all. Make sure you hold the company to other standards that you feel are important in your particular situation.
This is guest post from a potential customer to help others in search of a quality tree service company....
I have a few trees to be cut within the next few weeks. To make sure I have the best tree cutters near me to do the job, I have compiled a list of 4 questions that I will be using as my guide on my journey to get the most qualified individuals to help me bring down the trees.
1. How much time will you need?
The time they should take to complete the job should be directly proportional to the complexity involved in cutting the trees.
If they promise an instant solution like they will call it by name and it falls, then I know I have to worry about their services. I will require them to assess and fully understand the job at stake before they can intervene with an estimate of the time they think it will take them to complete the job.
Additionally, spending a lot of time than necessary will also be a point to consider. This may mean they don’t really understand the tree cutting tasks, that’s why they want excess time to try and figure out how to get the job done.
Realistic time frames will help plan my day as I have to wait for them to complete the job before I can leave the house.
2. Are you insured and licensed? Can I have a copy of the two?
In the tree cutting industry insurance is very important. Before I hire qualified tree cutters near me, I must make sure there is a plan in place in case the tree lands on my house when its cut. This will make me relax knowing that any damages are covered by the insurance company.
Being licensed proves that they have what it takes to cut trees. It also means they have taken the required courses and have the relevant experiences. The two major licenses are the International Society of Arboriculture (ISA) and the Tree Care Industry Association (TCIA). If they have any one of these I know I got the best deal.
3. What does your package include?
The answer to these question must appear in written form. Since it’s my first time to scout for a tree cutter near me for my upcoming project, these professionals may take advantage of my naivety and offer me a half-baked package.
When providing the answer to this question, I expect them to specify what happens after they cut the trees. Will they chop it for me? Will they haul away the tree? Or will they leave the tree lying on the ground and expect me to handle it from there?
I understand each of these answers come with extra payments but it would be nice if I knew upfront what to expect from them.
4. Should I pay before service?
How will they charge me for the whole project? Will they require a down payment? Will I pay the full amount before or after they are done cutting the trees?
This questions will give me an idea of who am dealing with. Although paying the full amount is not an option for me, paying them a down payment after they are on site will be good for me.
So there has been a stubborn tree in your yard and you want to trim it. What most people don’t realize about tree trimming, its that is very risky. At the onset it seems as only getting a high enough ladder, accessing the branches and chopping them off the tree.
Actually that is what trimming is in very simple terms. But what about the risk of you falling off the ladder? Some few broken limbs, even sometimes it can result to loss of life.
What about your property in the compound. Are you ready to pay for damages you brought upon yourself? If you are ready for all and more of the above, there is no need for a seek the services tree trimming companies.
A good bet is that you care for your health and property. That’s why you will drop that idea of doing it yourself and hire professionals.
Below are 3 benefits of hiring professionals to handle the trimming job:
These tools are very expensive. By using the services of tree trimming professionals, you will not be spending your money on tools that you don't use regularly. Again you must learn who to effective use the tools which may take quite some time.
Wrong trimming of trees can cause damages to the tree some of which will cause the tree to dry up. Cutting too much or too little of the branch has its own effects on the general health of the tree.
Professional tree trimmers follow international standards which specify how trimming should be done. Additionally, tree trimmers take the health of the tree into consideration before trimming to make sure the tree gets better with trimming and not the other way round.
Some tree species have weaker branches, a professional will advise you if you have been worried about the branches or the tree can hold their weight no matter how large they get.
They are also certified which proves they understand the tree industry well. Some certifications are very hard to obtain since the certifying body needs to be convinced that the company has all the hands on experience plus laid out procedures of their professional operations.
It would therefore be advisable not to do tree trimming all by yourself when professionals are at your side waiting for your call.
Cutting down trees is easy when the right tools are used but very difficult when you do not know or use the wrong tools.
There are 3 tools that are necessary when cutting down trees. These tools vary in application. This means you should assess the need first before selecting the tool to be used. This selection will largely be based on the size of the tree and the purpose why you cutting the tree.
For example, it will not be wise to cut a big tree using an ax. It will also not be wise to use a hired chainsaw to cut a very small tree that even an ax can cut.
If there is a need for special purposes like to produce construction beams and timber, tools that provide for smooth edges and surfaces should be used.
Below is a list of 3 tools that are necessary when cutting down trees:
1. Cross-cut saws.
These are manual saws which are operated by two people. Each end of the saw has a handle.
In order to effectively use the saw, the saw is held at an angle of 45 degrees with the two operators standing on both sides of the tree.
Depending on the diameter of the tree, a corresponding cross-cut saw size can be chosen because the saws come in different sizes to cater for different tree sizes.
This can be single sided or double sided. Axes have been used for tree cutting since back in time. Their easy to use nature makes them an easy choice when cutting trees. Some types like the pick ax are best suited when prying tree roots from the ground.
These are the most powerful tree cutting tools. For them to operate, they use either fuel or electricity. They are the most dangerous tools to be used and precaution should be taken when operating them.
Tree cutting tools vary depending on their intended use. The list above gives the basic tools that can be used when you want cut trees on your own. Whether, when you are comfortable with any of the above or any other tools, seek help from professionals to avoid injuring yourself, others, and property.